Battery Operated Detector – SHIELD Global https://shieldglobal.com Trusted Worldwide Mon, 16 Sep 2024 06:22:41 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://shieldglobal.com/wp-content/uploads/2024/05/cropped-a6nuSUGY_400x400-32x32.png Battery Operated Detector – SHIELD Global https://shieldglobal.com 32 32 Multi-Sensor Fire Alarm https://shieldglobal.com/product/multi-sensor-fire-alarm/ Thu, 28 Mar 2024 03:50:54 +0000 https://shieldglobal.com/?post_type=product&p=6785

Mains powered with Battery back-up

The SBI-1030 is a Multi-Sensor Fire Alarm that contains two separate sensing elements – optical and heat. Using intelligent software to monitor two different products of fire, its response to all fire types (TF1 to TF7) is vastly improved over traditional single sensor alarms. The new sensor chamber design intelligent software and the unique dust compensation algorithm also combine to reduce the frequency of nuisance alarms.

The SBI-1030 runs on 230V AC mains power. In the event of mains failure, the 10 Year+ built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.

The SBI-1030 also has hard wired Remote Control capability, enabling it to be interconnected to and communicate with compatible Alarms and Devices. Up to 12 Alarms and Devices can be interconnected, which will cause all Alarms to sound when one unit senses fire. An interconnected system will enhance early detection and warning of fire.

The SBI-1030 self-checks its sensors, battery voltage and internal circuitry every 40 seconds. Any fault condition found will be indicated by a combination of Red / Amber LED flashes and / or audible beeps. The SBI-1030 is designed with advanced diagnostics to help pre-warn of incumbent fault

The memory feature allows an Alarm that has previously activated to be easily identified.

The post Multi-Sensor Fire Alarm appeared first on SHIELD Global.

]]>

Mains powered with Battery back-up

The SBI-1030 is a Multi-Sensor Fire Alarm that contains two separate sensing elements – optical and heat. Using intelligent software to monitor two different products of fire, its response to all fire types (TF1 to TF7) is vastly improved over traditional single sensor alarms. The new sensor chamber design intelligent software and the unique dust compensation algorithm also combine to reduce the frequency of nuisance alarms.

The SBI-1030 runs on 230V AC mains power. In the event of mains failure, the 10 Year+ built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.

The SBI-1030 also has hard wired Remote Control capability, enabling it to be interconnected to and communicate with compatible Alarms and Devices. Up to 12 Alarms and Devices can be interconnected, which will cause all Alarms to sound when one unit senses fire. An interconnected system will enhance early detection and warning of fire.

The SBI-1030 self-checks its sensors, battery voltage and internal circuitry every 40 seconds. Any fault condition found will be indicated by a combination of Red / Amber LED flashes and / or audible beeps. The SBI-1030 is designed with advanced diagnostics to help pre-warn of incumbent fault

The memory feature allows an Alarm that has previously activated to be easily identified.

The post Multi-Sensor Fire Alarm appeared first on SHIELD Global.

]]> Optical Smoke Alarm https://shieldglobal.com/product/optical-smoke-alarm/ Thu, 28 Mar 2024 03:50:54 +0000 https://shieldglobal.com/?post_type=product&p=6786

Mains powered with Battery Back-up

The SBI-1010 Optical Smoke Alarm comes with 230V AC mains power supply and replaceable Alkaline battery back-up. It is best for detecting heat build-up from large flaming fires.

It is supplied with the Easi-Fit base to facilitate quick and simple installation, combined with simple detector head removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the detector head slides on.

The SBI-1010 Optical Smoke Alarm may operate as a standalone alarm or may be interconnected to other alarm system.

The alarm is fitted with a Test / Hush button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false or nuisance alarm, e.g. cooking fumes.

The SBI-1010 Optical Smoke Alarm is fitted with a mains ‘power on’ green LED indicator and red LED indicator for false conditions.

The memory feature allows an alarm that has previously activated to be easily identified. This is useful if you have been away from the property at the time of the alarm event.

The post Optical Smoke Alarm appeared first on SHIELD Global.

]]>

Mains powered with Battery Back-up

The SBI-1010 Optical Smoke Alarm comes with 230V AC mains power supply and replaceable Alkaline battery back-up. It is best for detecting heat build-up from large flaming fires.

It is supplied with the Easi-Fit base to facilitate quick and simple installation, combined with simple detector head removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the detector head slides on.

The SBI-1010 Optical Smoke Alarm may operate as a standalone alarm or may be interconnected to other alarm system.

The alarm is fitted with a Test / Hush button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false or nuisance alarm, e.g. cooking fumes.

The SBI-1010 Optical Smoke Alarm is fitted with a mains ‘power on’ green LED indicator and red LED indicator for false conditions.

The memory feature allows an alarm that has previously activated to be easily identified. This is useful if you have been away from the property at the time of the alarm event.

The post Optical Smoke Alarm appeared first on SHIELD Global.

]]> Hard-Wired Relay Module https://shieldglobal.com/product/hard-wired-relay-module/ Thu, 28 Mar 2024 03:50:54 +0000 https://shieldglobal.com/?post_type=product&p=6787

The SBI-3010 is a Hard-Wired Relay Module that switches a relay to activate external devices when an Alarm in the system is triggered. The electrically isolated contacts can be used for many applications such as signalling, turning on lights, strobes etc. It has volt free contacts (Normally Open and Normally Closed) as standard but can be wired to give a 230V output or 24V output using an external 24V supply.

The SBI-3010 is mains powered with rechargable lithium cells in the event of mains power failure. The lithium cells have a 10 year life and are designed to last for the working life of the relay. They will provide up to 2 months operation in the event of a mains power failure. The Module contains a battery on / off switch to ensure battery life is maximised during shipping and storage.

The SBI-3010 is designed to be installed underneath an Easi-Fit base Alarm.

The Module contains an internal switch that selects Pulse or Continuous output modes of operation. The Pulse output will switch back the relay contacts to their original state after 5 seconds. The Continuous output will continue to send a signal for as long as the Alarm sounds.

The post Hard-Wired Relay Module appeared first on SHIELD Global.

]]>

The SBI-3010 is a Hard-Wired Relay Module that switches a relay to activate external devices when an Alarm in the system is triggered. The electrically isolated contacts can be used for many applications such as signalling, turning on lights, strobes etc. It has volt free contacts (Normally Open and Normally Closed) as standard but can be wired to give a 230V output or 24V output using an external 24V supply.

The SBI-3010 is mains powered with rechargable lithium cells in the event of mains power failure. The lithium cells have a 10 year life and are designed to last for the working life of the relay. They will provide up to 2 months operation in the event of a mains power failure. The Module contains a battery on / off switch to ensure battery life is maximised during shipping and storage.

The SBI-3010 is designed to be installed underneath an Easi-Fit base Alarm.

The Module contains an internal switch that selects Pulse or Continuous output modes of operation. The Pulse output will switch back the relay contacts to their original state after 5 seconds. The Continuous output will continue to send a signal for as long as the Alarm sounds.

The post Hard-Wired Relay Module appeared first on SHIELD Global.

]]> Remote Control Switch https://shieldglobal.com/product/remote-control-switch/ Thu, 28 Mar 2024 03:50:54 +0000 https://shieldglobal.com/?post_type=product&p=6788

Hard-wired Alarm Control Switch

The SBI-3020 Alarm Control switch is designed for use with hardwired smoke / heat alarms, Carbon Monoxide alarms and devices. It is used to control all the alarms in a system from one convenient place. We highly recommend fitting a control switch if you have multiple smoke and heat alarms on the same system.

The Alarm Control switch increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system.

The Test switch allows the user to test the alarms easily, without having to access the alarms on the ceiling. By pressing the Test switch all alarms will sound for a short period.

The Locate switch allows the user to identify which alarm has triggered the system to sound. By pressing the Locate switch all alarms will sound except the alarm which triggered the alarm.

The Silence switch allows the user to silence all alarms in a system if a false / nuisnace alarm has been identified. By pressing the Silence switch all alarms will stop alarming for a 10 minute period.

The SBI-3020 is supplied complete with it’s own surface mount pattress and all fixings. It can also be mounted in a standard recessed box (not supplied).

The post Remote Control Switch appeared first on SHIELD Global.

]]>

Hard-wired Alarm Control Switch

The SBI-3020 Alarm Control switch is designed for use with hardwired smoke / heat alarms, Carbon Monoxide alarms and devices. It is used to control all the alarms in a system from one convenient place. We highly recommend fitting a control switch if you have multiple smoke and heat alarms on the same system.

The Alarm Control switch increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system.

The Test switch allows the user to test the alarms easily, without having to access the alarms on the ceiling. By pressing the Test switch all alarms will sound for a short period.

The Locate switch allows the user to identify which alarm has triggered the system to sound. By pressing the Locate switch all alarms will sound except the alarm which triggered the alarm.

The Silence switch allows the user to silence all alarms in a system if a false / nuisnace alarm has been identified. By pressing the Silence switch all alarms will stop alarming for a 10 minute period.

The SBI-3020 is supplied complete with it’s own surface mount pattress and all fixings. It can also be mounted in a standard recessed box (not supplied).

The post Remote Control Switch appeared first on SHIELD Global.

]]> Heat Alarm https://shieldglobal.com/product/heat-alarm/ Thu, 28 Mar 2024 03:50:54 +0000 https://shieldglobal.com/?post_type=product&p=6784

Mains powered with Battery Back-up

The SBI-1020 Heat Alarm comes with 230V AC mains power supply and replaceable Alkaline battery back-up. It is best for detecting heat build-up from large flaming fires.

It is supplied with the Easi-Fit base to facilitate quick and simple installation, combined with simple detector head removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the detector head slides on.

The SBI-1020 Heat Alarm may operate as a standalone alarm or may be interconnected to other alarms via a wired or wireless system. When interconnected all alarms in the system will sound if a fire is detected.

The alarm is fitted with a Test / Hush button to facilitate frequent testing of the alarm and system. The silence function allows the alarm / system to be silenced in the case of a false or nuisance alarm, e.g. cooking fumes.

The SBI-1020 Heat Alarm is fitted with a mains ‘power on’ green LED indicator and red LED indicator for false conditions.

The memory feature allows an alarm that has previously activated to be easily identified. This is useful if you have been away from the property at the time of the alarm event.

The post Heat Alarm appeared first on SHIELD Global.

]]>

Mains powered with Battery Back-up

The SBI-1020 Heat Alarm comes with 230V AC mains power supply and replaceable Alkaline battery back-up. It is best for detecting heat build-up from large flaming fires.

It is supplied with the Easi-Fit base to facilitate quick and simple installation, combined with simple detector head removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the detector head slides on.

The SBI-1020 Heat Alarm may operate as a standalone alarm or may be interconnected to other alarms via a wired or wireless system. When interconnected all alarms in the system will sound if a fire is detected.

The alarm is fitted with a Test / Hush button to facilitate frequent testing of the alarm and system. The silence function allows the alarm / system to be silenced in the case of a false or nuisance alarm, e.g. cooking fumes.

The SBI-1020 Heat Alarm is fitted with a mains ‘power on’ green LED indicator and red LED indicator for false conditions.

The memory feature allows an alarm that has previously activated to be easily identified. This is useful if you have been away from the property at the time of the alarm event.

The post Heat Alarm appeared first on SHIELD Global.

]]>