The weatherproof status indicators are designed to be used with various suppression control systems. The indicators are giving separate lamp indications for auto, manual and discharge conditions.

The Shield indicator SD-SI-0213 is weatherproof and has three lamp status indicators:

• Red to indicate system has discharged
• Amber to indicate system in in automatic operation
• Green to indicate system in in manual operation

In addition to the three lamp status indicators this model has an auto/manual key switch

The post Extinguishant Control System appeared first on SHIELD Global.

SHIELD Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are nine heat detectors in the series range designed to suit a wide variety of operating conditions.

The post Heat Detector ( 170ºF / 77ºC) appeared first on SHIELD Global.

The post Heat Detector ( 200ºF / 93ºC) appeared first on SHIELD Global.

SHIELD conventional standard base has been designed to enable detectors to be fitted without the need of force – particularly useful when fitting to suspended ceilings. All bases have one way only fit.

The post Standard Mounting Base appeared first on SHIELD Global.

The abort switch connects to the abort terminals of the Shield releasing panel. Any number of Shield abort switches may be connected to the circuit. The last switch must have the end of line device from the abort circuit terminals of the Shield releasing panel fitted across its connections to provide open and short circuit supervision. The unit is supplied mounted to a rugged steel enclosure but may also be flush mounted to a single gang electrical box.

The post Abort Switch appeared first on SHIELD Global.

With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.

The extensive configuration options of the Shield A-XT allow the functionality of the system to be extensively modified. The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety. The countdown timer is duplicated on upto seven remote status units to provide local indication of the system status.

With all of the electronics mounted on a single, easily removable steel plate, Shield A-XT panels are both robust and easy to install. Shield A-XT is supplied in an enclosure, available in standard red or optional grey color.

The post Extinguishant Control Panel appeared first on SHIELD Global.

SHIELD Photo-Electric Smoke Detector incorporates a pulsing LED located within the housing of the detector. The detector housing is identical to that of the Ionization Detector but has an indicator LED which is clear in quiescent state but produces red light in alarm.

The post Photo-Electric Smoke Detector appeared first on SHIELD Global.

SHIELD Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are nine heat detectors in the series range designed to suit a wide variety of operating conditions.

The post Heat Detector ( 135ºF / 57ºC) appeared first on SHIELD Global.