Fire Detection and Notification System / ELV – SHIELD Global

CONVENTIONAL REFLECTIVE BEAM DETECTOR

admin — Mon, 08 Jun 2026 06:42:52 +0000

SH-7130 Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real user friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning

The post CONVENTIONAL REFLECTIVE BEAM DETECTOR appeared first on SHIELD Global.

ADDRESSABLE INPUT / OUTPUT CONTROL MODULE

admin — Mon, 08 Jun 2026 05:55:53 +0000

The SH-7210 Addressable Single Input/output Module is characterized as one input or output volt free relay and control module. The unit is normally used for overriding equipment such as lift return, door holder, smoke extract fans, air handling unit, auto dialler to fire brigade, BMS and etc. The unit has builtin feedback signal feature, according to the pre-configured interface module command fire scenario, the alarm controller send out start command to the equipment required to start. After receiving the command, output module enables its relay to
change state. Once the module is under control and operated a confirmation signal will be sending back to the alarm controller. In addition, the unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line.

The post ADDRESSABLE INPUT / OUTPUT CONTROL MODULE appeared first on SHIELD Global.

LOOP ISOLATOR

admin — Mon, 08 Jun 2026 05:42:15 +0000

The SH-7230 manufactured base on the requirement of EN 54 part 17, European Standard. In the event of short circuit on the detection loop the SH-7230 Isolators either side of the loop will detect the problem and open circuit and isolates the faulty part of the loop, enabling other devises on the unaffected part of the loop to operate normally. The module will continue to monitor for the fault to be repaired, once the fault is cleared the isolator will automatically reinstate the effected part of the loop

The post LOOP ISOLATOR appeared first on SHIELD Global.

ADDRESSABLE SOUNDER STROBE

admin — Mon, 08 Jun 2026 05:33:40 +0000

The SH-7300 Addressable Sounder Strobe is alarm warning device used to notify persons in the vicinity of the occurrence fire emergency in order the person to take appropriate measures. The unit adopt multi-application device starting from the types, parameters and wiring layout in single unit. The SH-7300 can change into different alarm warning types such as sounderstrobe type, sounder type or strobe type using programming tool. In addition, parameters can be configured according to the requirement which include alarm tone from 17 different tones, single
address or dual address mode and also setting of power mode to low current consumption in a simple programming.

The post ADDRESSABLE SOUNDER STROBE appeared first on SHIELD Global.

ADDRESSABLE MANUAL CALL POINT

admin — Mon, 08 Jun 2026 05:27:09 +0000

The SH-7140 Addressable Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.

The post ADDRESSABLE MANUAL CALL POINT appeared first on SHIELD Global.

ADDRESSABLE SOUNDER BASE

admin — Mon, 08 Jun 2026 05:21:15 +0000

The SH-7302 Addressable Sounder Base is an alarm warning device used to notify persons in the vicinity of the occurrence fire emergency in order the person to take appropriate measures.

The post ADDRESSABLE SOUNDER BASE appeared first on SHIELD Global.

BASE MOUNT SHORT CIRCUIT ISOLATOR

admin — Mon, 08 Jun 2026 05:15:38 +0000

The SH-7232 manufactured base on the requirement of EN 54 part 17, European Standard. In the event of short circuit on the detection loop the SH-7232 Isolators either side of the loop will detect the problem and open circuit and isolates the faulty part of the loop, enabling other devices on the unaffected part of the loop to operate normally. The isolator will continue to monitor for the fault to be repaired, once the fault is cleared the isolator will automatically reinstate the effected part of the loop.

The post BASE MOUNT SHORT CIRCUIT ISOLATOR appeared first on SHIELD Global.

INTELLIGENT ADDRESSABLE MULTI DETECTOR

admin — Mon, 08 Jun 2026 05:07:06 +0000

The SH-7120 Intelligent Addressable Optical Smoke & Heat Detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns and combining with heat sensing sensor for temperature response. The unit manufactured base on the sensitivity requirement of EN 54 part 29, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs. The unit incorporates an intelligent processor that provides Algorithm map, inbuilt A/D converter, Drift compensation, and Self-Diagnosis and History log.

The post INTELLIGENT ADDRESSABLE MULTI DETECTOR appeared first on SHIELD Global.

INTELLIGENT DUAL HEAT DETECTOR

admin — Mon, 08 Jun 2026 04:56:20 +0000

The SH-7110 Intelligent Fixed and Rate of Rise Heat Detector is reliable for application in places where may have high dust level or smoky environments, making a normal smoke detector undesirable. The unit manufactured base on the sensitivity requirement of EN 54 part 5, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs. The unit incorporates an intelligent processor that provides inbuilt A/D converter, and Self-Diagnosis and History log.

The post INTELLIGENT DUAL HEAT DETECTOR appeared first on SHIELD Global.

INTELLIGENT ADDRESSABLE OPTICAL SMOKE DETECTOR

admin — Fri, 05 Jun 2026 04:49:23 +0000

The SH-7100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. The unit manufactured the sensitivity requirement of EN 54 part 7, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs. The unit incorporates an intelligent processor that provides Algorithm map, inbuilt A/D converter, Drift compensation, and Self-Diagnosis and History log.

The post INTELLIGENT ADDRESSABLE OPTICAL SMOKE DETECTOR appeared first on SHIELD Global.

4 LOOP INTELLIGENT ADDRESSABLE FIRE ALARM CONTROL PANEL

admin — Fri, 05 Jun 2026 04:07:43 +0000

The SH-7004 comprise of a range of analogue addressable, microprocessor based fire alarm control equipment to offer flexibility in both design and operation. The System is modular concept for easy tailoring of system design, to meet the full requirements of the project. The SH-7004 Intelligent Fire Alarm Control Panel is designed and manufactured to meet the requirement of BS EN54 Part 2&4

The post 4 LOOP INTELLIGENT ADDRESSABLE FIRE ALARM CONTROL PANEL appeared first on SHIELD Global.

Command Center Firefighter Phone (New)

admin — Fri, 18 Jul 2025 11:57:45 +0000

Compatible with NEO Series Command Centers.
Class B Supervised Interface Wiring.
Up to Two (2) NX10-TEL2-MCCS[/P] per Riser Module
Standard or push to talk handset.
Background noise cancellation module (optional).
Easy installation.
Supports up to 500 field phones.

The post Command Center Firefighter Phone (New) appeared first on SHIELD Global.